facebook rss twitter

Nvidia GeForce 470.05 driver kills RTX 3060 hash rate limiter

by Mark Tyson on 16 March 2021, 10:11

Tags: NVIDIA (NASDAQ:NVDA)

Quick Link: HEXUS.net/qaeqc7

Add to My Vault: x

Please log in to view Printer Friendly Layout

Over the last few days there have been reports that crypto mining types have somehow 'hacked' the Nvidia GeForce RTX 3060 12GB to unleash the GPU's full Ethereum mining potential. Some of these stories didn't hold water as it turned out that the miners were using the hardware to collect Ravecoin, not ETH. Yesterday a similar story popped up but this time the 'hack' was for real.

Initially Japan's PCWatch reported that a combination of GeForce 470.05 driver (Beta) and a special BIOS image did the trick for some miners – i.e. it removed Nvidia's has rate limiter for ETH mining. This would be a big thing if true upgrading the RTX 3060 12GB hashing performance from about 22MH/s to about 45MH/s.

Later in the day HardwareLuxx editor Andreas Schilling confirmed that the RTX 3060 hash rate limiter had been killed off. However, perhaps even worse than reported earlier – only the beta development driver seemed to be required (GeForce 470.05).

Schilling's interest was sparked, and he went ahead and tested various combinations of driver and BIOS, as any hardware tester probably would. Some interesting performance observations resulted using the QuickMiner software on the RTX 3060 12GB, as bullet pointed below:

  • Standard driver, standard BIOS: 21.7MH/s
  • GeForce 470.05 development driver and special BIOS: 35MH/s
  • GeForce 470.05 development driver and standard BIOS: 41MH/s

HawrdareLuxx: ETH mining on RTX 3060 with standard (top) and 470.05 driver - click to zoom

Limiter is removed on one RTX 3060 only

Now comes a twist, as those trying to kill the hash rate limiter using the above methods note that it will only remove the limit on a single RTX 3060 card. This might be good news for 'casual miners' who just mine on their single GPU in some spare time.

It is too early to say whether this GeForce dev driver could be a vector for hackers to unleash the ETH mining rate on racks full of RTX 3060 graphics cards or not.



HEXUS Forums :: 14 Comments

Login with Forum Account

Don't have an account? Register today!
This could be nice for the gamer to earn a few bucks back by casually mining.

But, what if a miner operation could, you know, use virtualization, and run various VMs and pass-through one 3060 for each of them?

NVIDIA is not on the gamers' side.
Still a massive fail by Nvidia - put all this security in so you can't hack the drivers and remove the limiter, and shoot yourself in the foot by releasing a driver without the limiter in!
tinsuke
But, what if a miner operation could, you know, use virtualization, and run various VMs and pass-through one 3060 for each of them?

Supposedly it detects the card is on a riser (presumably detects only having a x1 PCIe connection) and so would require something like a Threadripper board to get enough PCIe lanes to plug them all in.
Hehe yeah they really screwed up on that one, i do wonder why they made a limiter killing driver in the first place when the plan was for these to be limited in regard to mining.
I am thinking they probably made the driver, so it was at hand if they ran into a surplus of these that could not sell to gamers, and so would have to be sold to miners.

Nvidia must be hugely embarrassed.
I said this elsewhere, i would not be surprised if Nvidia orchestrated this as they knew the limiter would be cracked and was a way to save face.

It's perfect, say it's “unhackable” then “fumble a blunder” nullifying any claims that someone actually hacked the driver because the limiter removed code was in the wild.

They get off scot free, get all the money, no flashback.