facebook rss twitter

ASUS P7P55D motherboard preview: Intel Core i5 ready to go

by Tarinder Sandhu on 14 July 2009, 10:47

Tags: ASUS P5P55D EVO, ASUSTeK (TPE:2357), Intel (NASDAQ:INTC)

Quick Link: HEXUS.net/qaszi

Add to My Vault: x

What to expect


The IDE is run off a Marvell controller that also supports SATA 6Gb/s - double the standard speed - and we like the fact that the ports are rotated for easy connectivity. However, we're not so impressed by the location of the other four SATA ports; they should be on the edge of the board.

The blue-coloured ports run off the southbridge and support RAID0,1,5, and 10 modes via Intel's Storage Matrix Technology.

Power and reset buttons are always welcome, and there's basic on-board troubleshooting via debug LEDs, dubbed Q-LED. The board has the usual features, sporting FireWire, dual Gigabit LAN, and eight-channel HD audio, courtesy of VIA and Realtek controllers.

Graphics-wise, you might as well ignore the third x16 PCIe mechanical slot. The CPU provides 16 lanes that will be spit either two x8 or a single x16.

Notice the 2oz copper markings on the PCB? Following on from previous designs, ASUS is sandwiching the copper in the PCB, to help with heat dissipation. Here it's differentiated by having the copper interspersed between the PCB's layers.


The rear is pretty standard for a modern motherboard, taking in two Gigabit LAN ports and two forms of S/PDIF. A clear CMOS button is also handy, especially if your case is a pain to get into.

Summary

The introduction of newer Nehalem-based processors will herald the release of a raft of supporting chipsets to house the LGA1155/1156 chips. The ASUS P7P55D EVO constitutes a typical example of what to expect from a mid-to-high-end P55 motherboard. Overall layout is good, if not perfect, and we should expect to see it retail for less than X58 boards.

However, recent price-cuts to X58 motherboards has seen the price plummet to around £130, suggesting significant overlap between it and forthcoming P55. What Intel will need to do is to price LGA1156 at sensible levels, probably below £150, to entice buyers to the new platform.


ASUS, though, is ready to launch boards as soon as Intel gives a green light. We successfully benchmarked an LGA1156 chip and it's a shame that we can't publish numbers; they make for some very interesting reading.


HEXUS Forums :: 5 Comments

Login with Forum Account

Don't have an account? Register today!
Ugh, different mounting holes now?.. Good grief. Intel is just going all out ridiculous with breaking sound engineering principles.
For reference, that 2oz of copper doesn't mean there's 56g in there. It's plating standard which means the whole plated layer contains two ounces per square metre. A 2oz layer is about 65 microns thick. Even lead would have a hard time reaching 56g across an ATX PCB at that thickness…
This was on anandtech about a week a go, i like the new blue theme-ing though.
Doesn't look like it will do SLi judging by the lack of a nVidia chip.

Will be interesting to see the price difference between those that support SLi and those that don't.
shaithis
Doesn't look like it will do SLi judging by the lack of a nVidia chip.

Will be interesting to see the price difference between those that support SLi and those that don't.

According to the AnandTech article, it does support SLi:

AnandTech
The layout of the PCI/PCIe slots is very good and allows for a single PCIe x1, PCIe x4, and PCI slot when running SLI or CrossFire

From what I've read on the tubes, you don't need an nVidia specific chip to support SLi since the licensing options changed. Those that do have the nForce 200 chip have the added ability to support true PCIe x16 3 way-SLi instead of x16x8x8, etc. That flexibility does come at a premium although current GPUs (200 series) don't appear to benefit from the extra lanes in 3 way-SLi as far as gaming goes.