facebook rss twitter

Review: VIA KT600 / EPoX 8KRA2

by Tarinder Sandhu on 26 June 2003, 00:00

Tags: AMD (NYSE:AMD), VIA Technologies (TPE:2388), EPoX

Quick Link: HEXUS.net/qasf

Add to My Vault: x

Initial conclusions

The VIA KT600 chipset is a step in the right direction. VIA needed to match NVIDIA on pure specification before they took them on from a performance viewpoint. The 'upgrade' of the Northbridge now sees full XP3200 support and precious little else. The VT8237 Southbridge gets a couple of extra USB2.0 ports and, most notably, provision for on-chip SATA. The SATA feature extends to the ability of effectively adding a coupe of extra ports via an optional SATA physical layer. The memory interface, though, has been left in VIA's preferred single channel mode.

EPoX provided us with a board that appeared to be a final, finished product. The 8KRA2+ motherboard added a number of decent features to the KT600 chipset. A decent BIOS, in both tweaking and voltage aspects, from a manufacturer who has consistently produced boards that were geared towards performance had us in high hopes. Indeed, VIA's claims that their FastStream64 memory controller had been extensively improved over previous generation's further whetted our appetite.

Imagine, then, our lack of excitement when we saw this board consistently fall behind the performance of a nForce2 Ultra 400 that was run in single channel memory mode. There's little to explain why it fell behind each and every time. We noticed that the EPoX board in our mammoth KT400A roundup was a little behind the pace of the comparison boards. This test board was updated once with a new BIOS, so will another one be needed to release the potential of the KT600 chipset, or is this as far as it will go ?.

We'll be comparing a number of retail KT600 boards in an upcoming roundup. That'll give us a definite clue as to whether the performance exhibited here is a little off or right on par for a KT600. On the basis of this sample, at least, NVIDIA won't be scurrying off looking for a rock to hide under. The bottom line is that we'll reserve overall performance judgement until further boards are tested. We'll also take that opportunity to compare the on-chip SATA performance against Intel's. For now, though, consider the KT600 as a work in progress.



Dave's Note!

This is a very early board, revision 0.3 we normally do not see boards till 0.6 if not later - we have been told by EPoX that this board is electrically sound, but the BIOS has a lot of headway in it - we wanted to get news to you about this new chipset fast.

When we got this board a few days ago it had a BIOS already on it, since then we have seen a couple of new ones both have brought a lot of speed to the scene. Clearly the board is being tweaked and setup properly by the guys at EPoX, I suspect we will see a fair few changes in coming days towards more performance. Of course we will have all the information on the main page for you.

I must publicly thank Tarinder for doing such an exceptional job, he has now flown out the country for a few days, and he turned this article around very fast for you guys.


HEXUS Forums :: 11 Comments

Login with Forum Account

Don't have an account? Register today!
You could go SLI Geforce 6, or Matrox Parhelia. I can't think of any other setup that will allow it, I'll do a quick search for you though.

Nup, can't find anything else after a quick look.
The only Triple headed card I know of at the present time are the pharhelia range of cards.

More information can be found here ;

http://www.matrox.com/mga/products/parhelia/128mb.cfm

and heres some quick tech info on the card ;

Key features:
512-bit GPU
256-bit DDR memory interface
128MB DDR memory
High performance 2D, 3D & video
Triple-RGB, Dual-DVI, TV output
Surround Design and Surround Gaming
DualHead-HF and TripleHead Desktop
16x Fragment Antialiasing
UltraSharp Display Output technology
10-bit GigaColor technology
Matrox PrecisionCAD driver for AutoCAD®
Realtime Display Color Adjustment
PureVideo Preview
Visualization Plugin for AutoCAD®
WYSIWYG Plug-ins for DCC
10-bit GigaColor Plugin for PhotoShop
AGP 8X

Hope this helps ;
wow, speedy :)

i found the 256Mb Matrox's on MicroDirect for £500. I've used a Matrox before and wasnt overly impressed, although it was a few years ago so might have to have another shifty. GeForce 6 SLI sounds interesting *chin scratch*

Cheers all!
Just bear in mind that the parpahalia isnt the greatest 3d performer, but its the best you'll get with 3 monitors. Its price is kept up by the fact it's the only triple header.

If you wanted the option of more than 3 monitors then you could run a multi-monitor G200. Up to 16 panels with this:

http://www.matrox.com/mga/products/g200_mms/home.cfm

hope this helps

f
The GeForce 6's in SLI mode aren't out yet… but watch this space ;)