Corsair 8GB DDR3-1,600 CL8
Corsair has a wide range of memory modules for all platforms. Up until last week the company's fastest Lynnfield-based modules topped out at 2,000MHz, whilst an 8GB kit was packaged up with a maximum frequency of 1,600MHz.The release of the GTX modules means that two DIMMs can now be run at 2,250MHz at CL8 or four DIMMs at 2,133MHz CL8, with both rated at 1.65V.
Coming back to the larger-capacity kit on review here, CMX8GX3M4A1600C8, the blue-topped modules ship with DDR3-1,600MHz speeds with 8-8-8 timings. A second kit, CMX8GX3M4A1600C9, is available that runs with CL9 for a touch less performance compensated by a lower street price.
We suggest that you use a 64-bit operating system to get the most out of the RAM's capacity, as the vagaries of a 32-bit OS will leave you with less than 4GB of addressable memory.
Part of the DOMINATOR range, the four 2,048MB modules make up the requisite 8,192MB capacity. All of Corsair's Intel-oriented DDR3-1,600MHz range has built-in XMP settings for easy-as-pie configuration.
Corsair guarantees that all four modules will work on a P55 chipset-based motherboard, and the set is backed by a lifetime warranty should matters go awry.
Not content with supplying the four DOMINATOR-clad modules, the package also includes the decent Airflow fan - primarily used if you're pushing the modules further; it's not needed at stock speeds.
Currently listed at £235, including VAT, they're certainly not cheap, especially when a Corsair 4GB (2 x 2GB) CL9 pack costs £85, much the same price as the Kingston set on page two.
We can see where Corsair has put the extra work in with these DOMINATOR modules, though, and it'll be interesting to see how they overclock compared to the Kingston set.
