|
Intel D845PEBT2, Intel i845PE Chipset (with ICH4), Socket 478 Intel Pentium 4 DDR Motherboard supporting HyperThreading
• Intel Pentium 4 3.06GHz 'Northwood' @ 23 x 133MHz FSB (3.06GHz)
• AMD Athlon XP2700+ 'Thoroughbred B' @ 13 x 166MHz FSB (2.17GHz)
• Intel Pentium 4 2.8 'Northwood' @ 21 x 133MHz FSB (2.8GHz)
• Intel D850EMV2, Intel i850e Chipset (with ICH2), Socket 478 Intel Pentium 4 RDRAM Motherboard supporting HyperThreading
• Gigabyte GA-8IHXP, Intel i850e Chipset (with ICH4), Socket 478 Intel Pentium 4 RDRAM Motherboard
• Asus A7N8X, NVIDIA nForce2 Chipset, Socket A Athlon XP DDR Motherboard
• 2 x 256MB Crucial PC2700 DDR Memory Modules (CAS2, 2-5-2)
• 2 x 256MB Corsair PC3200 DDR Memory Modules (CAS2, 2-5-2)
• 2 x 256MB Samsung PC800 RDRAM (PC1066 mode, 4 x 133)
• 2 x 256MB Samsung PC1600 RDRAM (PC1066 mode, 4 x 133)
• Sapphire ATI Radeon R9700 Pro 128MB
• Windows XP Professional Build 2600.xpclient.010817-1148
• Plutonium XP 8.1 Radeon Drivers (based on ATI CATALYST build 6166)
• Quake3 v1.30
• 3DMark 2001 Professional Second Edition
• Serious Sam: The Second Encounter Demo
• Comanche 4 Demo Benchmark
• Hexux version of PiFast version 4.1, by Xavier Gourdon
• LAME v3.92 MMX and RazorLame 1.1.5 front end
• VirtualDub and DivX 4.12
• Unreal Tournament 2003 Demo
• OcUK SETI Benchmark
The board was tested with the 3.06GHz processor supplied by Intel for the original 3.06 review and HyperThreading was tested both enabled and turned off. The board is up against some hard hitting AMD hardware and a 2.8GHz RDRAM system we've had in labs previously using the same software and graphics card combination.
As always, benchmarks were run 3 times and the upper and lower results discarded to leave the median result for the graphs. If any result differed by more than 5% from the other 2, all 3 results were discarded and a fresh 3 results were obtained. Excepting SETI due to the time taken to complete this benchmark.
|
