Mods
LCD modAfter purchasing a Matrix Orbital BLC2021-WB from Kustom PC's I was looking for methods and ways in which to mount and use the LCD. The choice was between an internal lcd or making a project box for it to be external and connect to the rear of the PC. I chose to get rid of the floppy drive and mount it at the top of the case.
Securing the LCD was done by cutting out the design of the back of the LCD onto the top of the case front bezel.
and then attaching the lcd to it
After making sure the lcd was installed securely and making sure it works i came on cutting out the hole on the blanking plate for the A102 case from kustom again.
Once measured, I proceeded with cutting the screens shape into the cover. After hours of filing down and making sure it fit I ended up with this.
and then attached it to the case to finish the mod.
