facebook rss twitter

Corsair launches its fastest ever 128GB, 64GB and 32GB DDR4 Kits

by Mark Tyson on 19 January 2016, 12:01

Tags: Corsair, Intel (NASDAQ:INTC)

Quick Link: HEXUS.net/qacxx4

Add to My Vault: x

PC enthusiast component specialist Corsair has announced its fastest ever 128GB, 64GB and 32GB DDR4 Kits. These are the part of the Vengeance LPX DDR4 range of kits and boast headline frequencies up to 3,600MHz plus Intel XMP 2.0 compatibility for easy overclocking.

The fastest of the newly announced memory kits, predictably, is the Corsair Vengeance LPX 32GB (4x8GB) kit which can run at a frequency of 3,600MHz. This 32GB DDR4 kit runs at 1.35V with CL18-19-19-39 timings. Stepping up in capacity Corsair is offering the new Vengeance LPX 64GB kit. This employs 4x16GB DDR4 memory modules and runs as fast as 3,333MHz at 1.35V with CL16-18-18-36 timings. The Corsair Vengeance LPX 32B and 64GB kits are optimized for Intel’s Z170 dual-channel platform.

Doubling up again, Corsair's largest kit announced today is the Vengeance LPX 128GB. This uses 8x16GB DDR4 memory modules, clocked at 3,000MHz, and runs at 1.35V with CL16-18-18-36 low-latency timings. This kit is "designed to push Intel’s X99 quad-channel platform to the next level," and its capacity and speed should appeal to high-end workstation builders who intend to run the most demanding applications.

Included in the memory kits is Corsair's Vengeance Airflow cooling system, a removable 40mm fan cooling bracket fitted to each bank of DIMMs that provides constant airflow "to ensure modules remain cool and stable regardless of load". The three new high speed memory kits are provided with black Vengeance LPX aluminium heat spreaders for improved thermals but the smaller 32GB/64GB kits are also available with red heat spreaders, if you prefer.

Corsair's new memory kits are available immediately via its worldwide network. Please refer to the SKU table below for part numbers and recommended US pricing.

Model

Part number

MSRP

Black Vengeance LPX 128GB (8x16GB) 3,000MHz

CMK128GX4M8B3000C16

$1,174.99 Exc. Tax

Black Vengeance LPX 64GB (4x16GB) 3,333MHz

CMK64GX4M4B3333C16

$549.99 Exc. Tax

Red Vengeance LPX 64GB (4x16GB) 3,333MHz

CMK64GX4M4B3333C16R

$549.99 Exc. Tax

Black Vengeance LPX 32GB (4x8GB) 3,600MHz

CMK32GX4M4B3600C18

$349.99 Exc. Tax

Red Vengeance LPX 32GB (4x8GB) 3,600MHz

CMK32GX4M4B3600C18R

$349.99 Exc. Tax

 



HEXUS Forums :: 10 Comments

Login with Forum Account

Don't have an account? Register today!
Isn't CL16-18-18-36 actually pretty damn bad? I know the influence is only around 5 percent, but this seems to be getting out of hand recently.
CL on ddr4 is slightly lower but I thought that was down to architecture changes so it's not overly noticeable.

It's nice to see they're doing 4x16GB packs to cater for the matx crowd, that's been pretty hard to find unlike 2 and 8 packs lol
Prices are a bit steep for my pocket at the moment. :(

One thing though, (running the risk of exposing my ignorance), why is a “Z170 optimised set” consisting of four modules? If the Z170 is dual channel then surely a ‘mere’ pair of DIMMs would do? And how is that four way set not also eminently suitable for the X99 (which is quad channel)?

Interestingly, (to me at least), the X99 specific kit isn't compatible with some boards - like the Asus boards I've been looking at which, for whatever reason, have a stated memory capacity limit of 64GB.
crossy
One thing though, (running the risk of exposing my ignorance), why is a “Z170 optimised set” consisting of four modules? If the Z170 is dual channel then surely a ‘mere’ pair of DIMMs would do? And how is that four way set not also eminently suitable for the X99 (which is quad channel)?
price increases most likely :) Personally I'd have said a 4 module pack is meant for x99 due to quad channel but I suppose they're going by memory sockets which is usually 4 on z170.

Interestingly, (to me at least), the X99 specific kit isn't compatible with some boards - like the Asus boards I've been looking at which, for whatever reason, have a stated memory capacity limit of 64GB.
following on from above it's likely ‘meant’ for 8 memory socket atx boards rather than those (matx) with just 4.. yeah for some reason everyone seems to be ‘forgetting’ about the x99 matx boards :(
crossy
Prices are a bit steep for my pocket at the moment. :(

One thing though, (running the risk of exposing my ignorance), why is a “Z170 optimised set” consisting of four modules? If the Z170 is dual channel then surely a ‘mere’ pair of DIMMs would do? And how is that four way set not also eminently suitable for the X99 (which is quad channel)?

Speed? X99 can't run memory as quick?