facebook rss twitter

Samsung preps another fix for 840 EVO SSD slowdowns

by Mark Tyson on 23 February 2015, 14:05

Tags: Samsung (005935.KS)

Quick Link: HEXUS.net/qacpc2

Add to My Vault: x

Samsung's 840 EVO SSD range were among the most impressive consumer SSDs on the market when they were first released in 2013, boasting super fast speeds at a relatively low cost per GB. Unfortunately, some users started to experience performance issues which dragged down the drive's read performance from the claimed 520MBps maximum speeds to a poor sub-100MBps speed region.

Samsung managed to identify the cause of the problem and supposedly fixed the 'bug' with a firmware update issued in October. However, users of some patched drives have been reporting that their SSDs are once again starting to suffer retrograde performance, even though the patch should have solved the issue permanently.

"In October, Samsung released a tool to address a slowdown in 840 EVO Sequential Read speeds reported by a small number of users after not using their drive for an extended period of time. This tool effectively and immediately returned the drive's performance to normal levels," the Korean tech giant said in an emailed statement to tech site AnandTech. "We understand that some users are experiencing the slowdown again. While we continue to look into the issue, Samsung will release an updated version of the Samsung SSD Magician software in March that will include a performance restoration tool."

Illustrative graph from AnandTech

Samsung previously stated that the performance issue was a result of a combination of normal NAND cell degradation and an issue with NAND management, however, the company has not stated at this point what the root cause of the latest issue is. AnandTech suspects that the cause is likely a continuation of the original issue, though on the upside, the Samsung still believes that it can be corrected.

It is probably worth noting that the performance issues have been isolated to the 840 EVO range alone, so owners of the newer Samsung 850 Pro and 850 EVO SSDs shouldn't have to worry about being affected in the future.

If you are a Samsung 840 EVO SSD owner, or have suffered noticeable slowdowns over time with any other SSD brand, please share your experiences in the comments below.



HEXUS Forums :: 40 Comments

Login with Forum Account

Don't have an account? Register today!
Phew, and I just ordered an 840 last week but it went end of life so ended up with an 850 instead :D apparently these will have no issues?
OS and Apps on my desktop are on 840EVO's (120GB and 500GB respectively) and I've not noticed any slowdown. That said, I've not patched the firmware (from the factory supplied one) because last time I did the Samsung software came up with a message that upgrading the firmware would erase the drive, and I didn't fancy the hassle of being forced to test my backup recoveries.

Anyone going to wonder out loud why this comes to light when Samsung are doing a push on the 850's? ;) That said, I've got 840's in the desktop and 830's in the two laptops and all four are working very well.
Slightly shocking.

I've even seen someone apply the last “fix”…..it took ages to re-write every cell on the disk, a recipe for disaster.

Until the 840 EVO I wad been content that Samsung were a quality SSD supplier….I now get the feeling they are more like Corsair: Make a good product that sells extremely well and gets high praise and then release a new version with every conceivable corner cut.
I've got an 840 EVO and haven't noticed any slowdown, although apart from booting into OS I don't do much shifting of data to/from the drive.

Might look at the fix anyway, but if it formats the drive in the process I'll steer clear.
Same here, my 14/15 month old 840 Evo still runs fine, but then it's only used as the OS drive, so it's not really worked that hard compared to my other SSD's. Maybe not ALL drive are affected?