facebook rss twitter

Lian Li outs compartmentalised PC-X2000FN chassis

by Parm Mann on 17 July 2012, 11:52

Tags: Lian Li

Quick Link: HEXUS.net/qabjqf

Add to My Vault: x

We saw Lian Li hit many of the right notes with PC-V700 - the company's smallest ATX chassis to date - but it's going for the complete opposite with the soon-to-be-unleased PC-X2000FN.

Described by the manufacturer as a "tall, slim EATX chassis," this unusual-looking enclosure vows to store the latest PC hardware in a tidy compartmentalised interior.

The PC-X2000FN's size - 693mm tall and 240mm wide - make it look ungainly, but Lian Li appears to be putting the unorthodox dimensions to good use. Split into three compartments, the top section is set aside exclusively for storage; where users can install two side-loading 5.25in optical drives, as well as up to four hot-swappable 3.5in hard drives and three 2.5in SSDs.

Maximising the available space, the middle section is large enough for an EATX, ATX or Micro ATX motherboard, and with no hard drives in this area, there's room for CPU coolers measuring up to 180mm tall and graphics cards measuring up to 340mm in length. The ten expansion slots could also come in handy if you're planning a triple- or quad-GPU configuration.

Rounding off the compartments, the third section located at the bottom of the case can house a power supply measuring up to 230mm in length and a further three hot-swappable 3.5in hard drives.

Cable-routing holes are plentiful, as are pre-installed fans, with Lian Li opting to include three 140mm front intakes, a 120mm exhaust in the middle compartment and a 140mm exhaust in the top compartment. There's a well-stocked top I/O panel, too, that includes four USB 3.0 ports, headset and microphone jacks, and eSATA.

The aluminium frame suggests top-notch build quality, and there's clearly a lot of room for a seriously high-end build, but the PC-X2000FN won't come cheap. Lian Li expects to have it in stores this September priced at $499 (roughly £385 inc. VAT).

Lian Li PC-X2000FN specification
Case Type Full tower chassis
Dimensions (W) 240mm x (H) 693mm x (D) 455mm
Front bezel Material Aluminium
Side Panel Aluminium
Body Material Aluminium
Colour All Black
Net Weight 11KG
5.25" drive bay (External) 2
3.5" drive bay (External) None
HDD bay 3.5-Inch HDD x9 (hotswap x7)
/ 2.5-Inch HDD x3
or 3.5-Inch HDD x8 (hotswap x7)
/ 2.5-Inch HDD x4
Expansion Slot 10
Motherboard EATX / ATX / Micro-ATX
System Fan (Front) 140mm Fan x3
System Fan (Top) None
System Fan (Rear) 120mm Fan x1
140mm Fan x1
I/O Ports USB 3.0 x 4
e-SATA x 1
HD Audio
Maximum Compatibility VGA Card length: 340mm
PSU length: 230mm
CPU cooler height: 180mm



HEXUS Forums :: 10 Comments

Login with Forum Account

Don't have an account? Register today!
No top mounted fans to push hot air out the top - which naturally rises to the top of the case… Honestly for £385 I would expect the perfect case - this falls some what short.
Hmm yeah i would expect the airflow to be slightly more balanced, i know Lian Li like to push positive air pressure but a bit more exhaust is required i think!
How much?!?!

I spent a small fortune on my Lian Li case, and I am distinctly unimpressed. It's noisy (despite claiming to be quiet and featuring damping materials and a door…), and not all that great to work with, despite being pretty large.

I admit my experience is somewhat limited, having worked with only 3 top end Lian Li cases over the last 5 years, but in that experience I have come to the opinion that they're simply not worth the money, for me at least.
I like the look of my case, but really that's it :/ I don't get the fuss that so many people make about their cases, and I certainly won't be buying any more for future PCs :/
Hopefully this has better air flow than my current Lian-Li. Excellent case but I just cant keep it cool, sadly lives with the side off.

Since buying a Fractal Design R3 for another computer, Lian-Li has become much less attractive.
Looks great, and then I saw the price